PREMIUMBASICECONOMY
+

Floor standing cabinets

Floor standing server cabinets

Floor standing frame

Wall-mounted cabinets

Accessories

PREMIUMBASICECONOMY
+

Floor standing server cabinets

Aisle containment

Cooling solutions

Accessories

PREMIUMBASICECONOMY
+

Fiber

Accessories

So1 Server frame

So1

Good With space

With the option of off-centre positioning, you can create plenty of space where you need it. A large space on both sides, or an extra large space on one side

Easy to install

So1 is built with aluminium profiles and supports up to 1,500 kilos. The enclosure is assembled with nothing but screws, making it easy to assemble, dismantle and reassemble. The So1 can be adapted as your business grows and changes.

Design without sharp edges

Enoc IT enclosures look so good that they are as suitable in an office as in a server room. The So1 is definitely no exception. Its rounded corners give it a sleek look. Concealed screws, aluminium profiles and an integrated door contribute to a streamlined appearance.

The So1 series is available in the heights of 24, 42 and 47 HU in combination with 600 and 800 mm widths and 1000 and 1200 mm deep.

Select the width, depth, height and colour you search for

Colour
  • Screw-assembled frame with aluminium profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile for universal mounting of accessories.
  • Frame can be dismantled by means of screws.
  • Maximum static load 1,500 kg, and devided on 4 19″ profiles.
  • So1-frame has no doors or side panels. Can be supplemented with doors and side panels from our range of accessories.
  • The top consists of replaceable modular panels. One panel has cable glands with brush strip on the back and the rest are cover plates. Can be replaced with ventilation panels, fan packages or panels with integrated cable glands. All modules can be rotated 90° and assembled with the cable glands on the left and/or right side. The U-shaped panel with integrated cable glands makes it easy to move pre-existing installations into the enclosure.
  • The base is open, but can be fitted with cover plate/base plate packages.
  • The 19" profiles can be steplessly repositioned through the depth of the enclosure. The depth profiles have markings for precise positioning of the 19" profiles. The 19" profiles are numbered in height units. The whole 19" assembly can be moved right or left to an off-centre position. Enclosures with a depth of ≤800 mm have one pair of 19" profiles pre-installed at a depth of 100 mm from the front of the enclosure. Enclosures with a depth of ≥1,000 mm have two pairs of 19" profiles. One pair is pre-installed at a depth of 100 mm from the front of the enclosure and the other pair is pre-installed 740 mm further in.
  • Finish: Black RAL9005.
High load capacity 1500 kg

4 19" profiles.
Central grounding Point M5 in the corner post.