F1 IT enclosure

F1 8820

Good with space

With the option of off-centre positioning, you can create plenty of space where you need it. A large space on both sides, or an extra large space on one side

Easy to install

F1 is built with aluminium profiles and supports up to 1,500 kilos. The enclosure is assembled with nothing but screws, making it easy to assemble, dismantle and reassemble. The F1 can be adapted as your business grows and changes.

Design without sharp edges

Enoc IT enclosures look so good that they are as suitable in an office as in a server room. The F1 is definitely no exception. Its rounded corners give it a sleek look. Concealed screws, aluminium profiles and an integrated door contribute to a streamlined appearance.

The F1 series is available in the heights of 20, 24, 29, 33, 38, 42 and 47 HU in combination with 600 and 800 mm widths and 600, 800, 1000 and 1200 mm deep.

Select the width, depth, height and colour you search for

Colour
  • Screw-assembled frame with aluminium profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile for universal mounting of accessories.
  • Frame can be dismantled by means of screws.
  • Finish: Enoc System textured beige or black RAL9005.
  • Ingress protection class IP20
  • Maximum static load 1,500 kg.
  • Front door is made of 4 mm smoke-coloured safety glass built into an aluminium frame. LS 85 ergonomic locking handle with C101 safety cylinder. Can be adapted for other lock systems.
    Integrated quick lock system allows door to be removed without use of tools. Door opening angle >180° in single enclosure configuration. Right-hinged, can be re-hung to be left-hinged.
  • Rear door made of 1 mm sheet steel built into an aluminium frame. LS 37 lock with C101 safety cylinder. Integrated quick lock system allows door to be removed without use of tools. Door opening angle
    >180° in single enclosure configuration. Right-hinged, can bere-hung to be left-hinged.
  • Sheet steel side panels, easy to detach and lockable from inside. Integrated handle for easier handling.
  • The top consists of replaceable modular panels. One panel has cable glands with brush strip on the back and the rest are cover plates. Can be replaced with ventilation panels, fan packages or panels with
    integrated cable glands. All modules can be rotated 90° and assembled with the cable glands on the left and/or right side. The U-shaped panel with integrated cable glands makes it easy to move pre-existing
    installations into the enclosure.
  • The base is open, but can be fitted with cover plate/ base plate packages.
  • The 19" profiles can be steplessly repositioned through the depth of the enclosure. The depth profiles have markings for precise positioning. The 19" profiles are numbered in height units.
  • The whole 19" assembly can be moved right or left to an off-centre position.
High load capacity 1500 kg

Locking handle LS 85 with saftey cylinder C101.
4 keys C101.
Depth 600 and 800 mm with 2 19″ profiles.
Depth 1000 and 1200 mm with 4 19″ profiles.
Central grounding Point M5 in the corner post