PREMIUMBASICECONOMY
+

Standschränke

Server Grundgestell

Standrahmen

Wandschränke

Zubehör

PREMIUMBASICECONOMY
+

Server Grundgestell

Kaltgang Einhausung

Kühlsystem

Standrahmen

Zubehör

  •  

Aisle containment-lösningar

+
PREMIUMBASICECONOMY
+

LWL Schrank

Zubehör

F3 Standschrank 19″

F3 Basic Floor Cabinet
  • F3 Basic Floor Cabinet

F3 is an all new series of floor standing 19" cabinets. F3 “borrows” many functions from the high end F1 cabinet but in a more basic form. Meaning most corner postbased
and 19" profile-based accessories will fit both F3 and F1. The new F3 floor cabinet has a unique design and is built with a hybrid between aluminum and steel.
Our modular thinking offers most versions on request. At Enoc we are committed to finding the solution that best fits you.

That is what we call “The Enoc Way”.

The F3 series is available in the heights of 24 and 42 HU in combination with 600 and 800 mm widths and 600, 800 and 1000 mm deep.

Wählen Sie die Breite, Tiefe, Höhe und Farbe aus

Farbe
  • F3 is built with aluminum profiles and steel.
  • Screw assembled frame with aluminum profiles, steel sheet profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile.
  • The 19" profiles can be steplessly repositioned through the depth of the enclosure. The depth profiles have markings for precise positioning of the 19" profiles. The 19" profiles are numbered in height units.
  • F3 contains one pair of 19" profiles (600 and 800 mm deep) or two pairs of 19" profiles (1000 mm deep). One pair is preinstalled at a depth of 100 mm from the front of the enclosure and the other pair is pre-installed 740 mm further in.
  • M10 thread in each corner both in the bottom and top for accessory fixing.
  • 1 central earthing point M5 in corner upright.

FRONT DOOR

  • Front door is made of 4 mm clear safety glass glued into an aluminum profiles left and right.
  • LS 19 locking wing with C101 safety cylinder. LS 85 can be installed as accessory. Integrated quick lock system allows door to be removed without use of tools.
  • Door opening angle >180 degrees in single enclosure configuration. Right hinged, can be rehung to be left hinged.

BACK DOOR

  • Back door is made of 1 mm sheet steel.
  • LS 39 lock with C101 safety cylinder. LS 85 can be installed as accessory. Integrated quick lock system allows door to be removed without use of tools.
  • Door opening angle >180 degrees in single enclosure configuration. Right hinged, can be re-hung to be left hinged.

SIDE PANELS

  • Sheet steel side panels, easy to detach and one lock lockable from inside and one slotted lock.
  • LS 29 with C101 safety cylinder available as accessory.

ROOF

  • Roof with cutout cable entrance in rear, left and right. One cutout to fit FPME or VPE accessory.
  • Brush list available as accessory.