Fs1 Floor cabinet IP 54

Fs1 Cabinet

The new Fs1 with IP54 is a sealed version of our premium 19" F1 floor cabinet. IP54 means maximum protection from dust.
The cabinet is available with cooling units and top plates or side panels with precut ventilation. Both versions provide for an
airtight fitting with our cooling  units. At Enoc we are committed to finding the solution that best fits you.

That is what we call “The Enoc Way”.

Select the width, depth, height and colour you search for

Colour
  • Built with aluminium profiles and supports up to 1500 kilos.
  • Screw-assembled frame with aluminium profiles and die-cast zinc corners. The frame has two integrated vertical screw pockets in each corner profile.
  • Steplessly repositioned through the entire depth of the enclosure. The depth profiles have markings for precise positioning of the 19" profiles. The 19" profiles are numbered in height units.
  • Each Fs1 contains two pairs of 19" profiles. One pair is preinstalled at a depth of 100 mm from the front of the enclosure and the other pair is pre-installed further in at 540 mm (for the 800 mm depth) or 740 mm (for the 1000/1200 mm depth).
  • 1 central earthing point M5 in corner upright.

Front door

  • Front glass door made of 4 mm smokecoloured safety glass built into an aluminium frame.
  • LS 85 ergonomic locking handle with C101 safety cylinder with 3-point locking preinstalled. Can be adapted to other locking systems.
  • Integrated quick lock system allows the door to be removed without use of tools.
  • Door opening angle >180 ° in single enclosure configuration. Right hinged, can be re-hung to be left hinged.

Back door

  • Back door made of 1 mm sheet steel built into an aluminium frame.
  • LS 85 ergonomic locking handle with C101 safety cylinder with 3-point locking preinstalled. Can be adapted to other locking systems. Integrated quick lock system allows the door to be removed without use of tools.
  • Door opening angle >180 ° in single enclosure configuration. Right hinged, can be re-hung to be left hinged.

Side panels

  • Sheet steel side panels, easy to detach and lockable from inside.
  • Can be ordered with precut holes for side coolers SC 14, SC 20 or SC 30.

Top- and bottom panels

  • Single sheet steel plate.
  • Cable entrance flange FL21 in rear left and right. Each flange with possibility to fit 2 cables Ø 8–17 mm, 2 cables Ø 6–13 mm, 2 cables Ø 5–10 mm and 20 cables Ø 4–10 mm.
  • Top panels can be ordered with precut holes for top coolers TC 14, TC 20, TC 28 or TC 41.
Static load up to 1500 kg